+971 4 2563 680
Products Category
Isoseal PU2P

Isoseal PU2PPour grade polyurethane sealant

Isoseal PU2P  is a two component self leveling polyurethane joint sealant  designed  for the sealing of joints in concrete roads,runways,oil terminals,parking,docks and harbour areas.It has excellant adhesion to concrete, marble and granite . When cures it become flexible which can accommodate thermal and moisture movements.

Characteristics

  • Permanent watertight sealing
  • Crack preventing by allowing expansion contraction
  • Self leveling
  • Environment friendly
  • Heavy movement accomodation 
  • Odorless
  • Resistance aganist sea water
  • Vapor proof barrier coating for interior & exterior joints.

 

Technical Specification

Properties Data Value
Chemical Base Polyurethane
Color Black
Density   1.30 kg/ltr
Solid Content 100% by weight
Shore A Hardness @25Deg. 15-20
Application Temp 4-48 deg C
Setting time@35Deg  10 hrs
Full cure @35Deg 96 hrs 
Movement Accommodation  Upto 25%

 

Installation

Surface Preparation

The substrate must be clean, dry and free of all contamination such as dirt, oil, grease, coatings etc which hinder an adhesion. The substrate must be sound and of sufficient strength. There should not be any standing water and should be a cured surface. 


Application Method 

Isoseal PU2P available in two part (Base & Hardner) .Pour the hardner into the base and mix thoroughly with a slow speed drill for 10 minutes. Once the kit has been mixed ,pour the mix directly into the joint.

  • Apply masking tape to both sides of the joints for getting a neat finish.
  •  
  • Health & Safety
  • Store away from sunlight, UV and other sources of light
  • Shelf life is 12 months if stored as per recommendation
  • Avoid contact with eyes and prolonged contact with skin.
  • For eyes flush immediately with water for 15 minutes and call a physician.
  • Protective clothing such as gloves and goggles should be worn when handling the product.
  • Keep containers tightly closed when not in use.

Packing . 4lt kit

Conditions of Use and Disclaimer The information contained in this Material Data Sheet is given in good faith based upon our current knowledge and does not imply warranty, expressed or implied. The information is provided and the product is sold on the basis that the product is used for its intended purpose and is used in a proper workmanlike manner in accordance with the instructions of the Product Data Sheet in suitable and safe working conditions. Under no circumstances will the Company be liable for loss, consequential or otherwise, arising from the use of the product.